In this buyers guide we aim to provide all the necessary details to enable you to choose the most suitable applinace for your application.
If you still need assistance after reading our guide please do not hesitate in picking up the phone and giving us a call.
What sizes are available?
We manufacture Angled Glass Cooker Hoods in 60cm, 70cm and 90cm width variations. The width variations are designed to perfectly match your choice of Hob.
What colours are available?
Our Angled Glass Cooker Hoods utilize black and ice white glass for their main astetic. This provides a fantastic wipe clean surface so your kitchen will always look spotless. The chimney sections are availble in two colours, Silver (stainless steel) and Black (black powder coated steel). These options can be used to help you match with our other appliances or your existing kitchen design.
How does the appliance perform?
Extraction rate - this is the rate the hood pulls air from the immediate area under the hood - its quoted in cubic metres per hour (m3/hr) and basically the higher the extraction rate, the more air can be filtered during use.
Our Angled Glass Cooker Hoods generally have higher extraction rates due to the sleek design - however we can maintain airflow without comprimising performance due to efficient design. The extraction rate for our Angled Glass Cooker Hoods range from 530 to 600 m3/hr.
Noise Output - this is quoted in Decibels (dB) - the higher the decibels, the more noise is created during operation - our engineers have used their years of experience to create hoods that are quiet without comprimising performance and efficiency. We quote maximum noise level when the hood is running at maximum output which is 62 dB for the hoods.
Handling the hood could not be simpler with 3 fan speeds operated via touch control.
How is the appliance installed?
Our Angled Glass Cooker Hoods are mounted on the wall above a hob. They are generally mounted using 4 fixings provided in a fixing kit supplied with the appliance. The adjustable chimney sections are also wall mounted above the body of the hood, providing a connection between the hood and the ceiling.
These hoods can be installed in re-circulation mode (active carbon filters fitted to the motor - optional accessories) or in vented mode with a ducting kit where the air can be extracted to the outside world.
The electrical supply required is 220-240 Volt 50 Hz 3 Amp load.