Island Curves For A Precise Performance
Perfect glass design for a large open space kitchen with an island design.
At 90cm wide this curved glass island cooker hood is made to be positioned over an island unit and makes for a truly amazing kitchen space for all the family.
The cooker hood is so simple to use and the three fan speeds can be controlled using the push buttons on the front of the appliance. This is also where you can operate the 4 halogen lights. The downlights are in the perfect position to nicely illuminate your island arrangement.
The aluminium grease filter is easily removable and requires cleaning every 2 to 3 weeks to maintain optimum extraction. It can be cleaned by either soaking in a sink full of soapy water or simply popping in the dishwasher.
Curved designer style for the most up to date open plan living for todays modern family.
This hood can either be vented to the outside or can be re-circulated. If you wish to vent to the outside you will need to purchase a ducting kit ART00812
If you want to re-circulate the air then you will need to purchase these carbon filters ART00803
We do not offer an installation service. If you are looking for an installer, please check out www.myappliances.net/installation
This appliance does not come with a plug. A cable is attached and we recommend fitting this to a fused spur unit.
A minimum of 750mm clearance is required above a gas hob and 650mm above an electric hob.
Please check the dimensions before you purchase. Items that do not meet your measurements must be returned at your own cost.
Please do not organise fitters or book days off work for the installation of appliances until you have received your products. We cannot be held liable for any costs incurred relating to this.