Capable and Stylish
The elegant full curved fascia and stainless steel finish gives this 60cm curved glass cooker hood its stylish touch.
With a competent 480 m3/hr extraction rate this designer curved glass hood offers a fantastic performance as well as style and it is best suited to a medium sized kitchen.
The three fan speeds can be controlled using the push buttons at the front. This is also where you can switch on the downlight, which will nicely illuminate your cooking area, giving your kitchen the perfect mood lighting if you are entertaining.
The aluminium grease filter can easily be removed and we recommend that you take it off every 2 to 3 weeks to clean. This can be done by soaking in a sink full of soapy water or in popped in the dishwasher.
Upgrade to a full curve and impress your friends and family!
This hood can either be vented to the outside or can be re-circulated. If you wish to vent to the outside you will need to purchase a ducting kit ART00820
If you want to re-circulate the air then you will need to purchase these carbon filters ART00801
We do not offer an installation service. If you are looking for an installer, please check out www.myappliances.net/installation
This appliance does not come with a plug. A cable is attached and we recommend fitting this to a fused spur unit.
A minimum of 750mm clearance is required above a gas hob and 650mm above an electric hob.
Chimney sections come complete with the hood. Please refer to the specification sheet for your specific size.
Please check the dimensions before you purchase. Items that do not meet your measurements must be returned at your own cost.
Please do not organise fitters or book days off work for the installation of appliances until you have received your products. We cannot be held liable for any costs incurred relating to this.