Stylish and Perfectly Practical All In One
Finished in a stylish stainless steel finish and a perfect match for a range cooker, this chimney style hood offers a very high extraction rate to remove all cooking odours with ease.
The easy to use push buttons select the power of extraction up to an intensive setting three and we also have two halogens that add style and nicely illuminate the cooking area.
The aluminium grease filters help trap grease and are dishwasher safe for easy cleaning, or alternatively just soak in the sink. We recommend that they should be cleaned every 2 to 3 weeks to maintain optimum extraction.
Add the finishing touch to your new kitchen with our range style cooker hood.
This hood can either be vented to the outside or can be re-circulated. If you wish to vent to the outside you will need to purchase a ducting kit ART00820
If you want to re-circulate the air then you will need to purchase these carbon filters ART00803
We do not offer an installation service. If you are looking for an installer, please check out www.myappliances.net/installation
This appliance does not come with a plug. A cable is attached and we recommend fitting this to a fused spur unit.
A minimum of 750mm clearance is required above a gas hob and 650mm above an electric hob.
Chimney sections come complete with the hood. Please refer to the specification sheet for your specific size.
Please check the dimensions before you purchase. Items that do not meet your measurements must be returned at your own cost.